鐵藝護欄是很容易生銹的。要做好防銹處理，每年定時進行除銹和涂漆，往常也要加強保護，發現有漆脫落，立即補漆。涂漆前要做好除銹，除銹越徹底，漆就越牢。除銹完成后，涂好底漆。底漆是起防銹作用的最重要的工序，對漆的質量要求及涂漆的工藝都有很高的要求。底漆做好后，可以在上面涂面漆。面漆除了加強防銹才能外，主要是美觀。

　　Iron railings are prone to rusting. To do a good job of rust prevention, regular rust removal and painting should be carried out every year, and protection should also be strengthened. If paint falls off, it should be repaired immediately. Before painting, it is necessary to remove rust thoroughly. The more thorough the rust removal, the stronger the paint will be. After rust removal is completed, apply the primer. Primer is the most important process for rust prevention, with high requirements for the quality of paint and the painting process. After the primer is done, a topcoat can be applied on top. In addition to enhancing rust prevention, topcoat is mainly for its aesthetic appeal.

　　為延伸野外鐵藝設備的壽數，還應做到以下幾點:

　　It's rusty. To extend the lifespan of field ironwork equipment, the following points should also be achieved:

　　1.要定時除塵:

　　1. Regularly remove dust:

　　一股說來，在制造過程中廠家已考慮到了野外環境的特色，在資料和涂料的選用上都力求做到防銹、耐要、抗腐蝕，抗曝曬等，所以用戶只需在選購鐵藝設備時認準知名的廠家，不要食圖便宣買一些質量不合格的鐵制設備就行了。我廠鐵藝護欄的質量優良，保養的好的話是不怎么生銹的。

　　In the manufacturing process, manufacturers have taken into account the characteristics of the outdoor environment, and strive to achieve rust prevention, durability, corrosion resistance, and sun exposure resistance in the selection of materials and coatings. Therefore, users only need to identify well-known manufacturers when purchasing iron equipment, and do not declare the purchase of some unqualified iron equipment based on pictures. The quality of our factory's wrought iron guardrails is excellent, and if well maintained, they will not rust much.

　　野外塵埃飛揚，日積月累，鐵藝設備上會落上一層浮塵。它會影響鐵藝的色澤，進而導致鐵藝保護膜的破損。所以應定時擦洗野外鐵藝設備，一般以柔軟件的棉織品擦洗為好。

　　Dust flies in the wilderness, and over time, a layer of floating dust will fall on the wrought iron equipment. It will affect the color of the wrought iron, leading to damage to the protective film of the wrought iron. So it is advisable to regularly clean outdoor iron equipment, usually with soft cotton fabrics.

　　2.要注意防潮時把水珠擦干。

　　2. Pay attention to wiping off water droplets when preventing moisture.

　　如果只是一般的野外空氣濕度，您可以定心鐵藝設備的防鍍性。如逢大霧氣候，運用干棉布擦洗鐵藝上的水珠;若逢雨天，應于雨停后及時把水擦干。

　　If it's just general outdoor air humidity, you can focus on the plating resistance of the wrought iron equipment. If encountering foggy weather, use a dry cotton cloth to scrub the water droplets on the iron work; If it rains, the water should be wiped dry in a timely manner after the rain stops.